Hot-swappable AC Power Module 150W, for S5800-48F4S


  • 331,00$

    • Product Code: FSP150-1Q01

Removal Process
• Wearing anti-static wrist strap, and confirm that the anti-static wrist strap is well grounded
• Disconnect all power connectors of the switch
• Undo the fastening screws on the left and right sides of power module with a cross-head screwdriver
• Grip the handle on the front end of power module to be installed with one hand and press on the top switch with another hand, and pull out the power module by smoothly sliding along the power slot until the plug of power module is completely separated from the socket inside chassis

Hot-insertable and hot-removable field-replaceable unit
Accessories Hot-insertable and hot-removable field-replaceable unit
Installation Process
• Wear ESD-preventive wrist strap, and confirm that the anti-static wrist strap is well grounded
• Maintain correct up-down direction of power module (in line with the positive direction of characters, if turned upside down, the power module can not be inserted to the end due to structural limit specially designed inside chassis),grip the handle on the front end of power module to be installed with one hand and support the bottom of power module with another hand, and insert the power module by smoothly sliding along the power slot until the plug of power module comes into full contact with the socket inside chassis
• Tighten up the fastening screws on the left and right sides of power module with a cross-head screwdriver. The following are the complete installation sketch map of the AC power module. The installation for DC power module is similar with AC
Hot-swappable AC Power Module 150W, for S5800-48F4S

The FSP150-1Q01 hot-swappable AC power supply modules are designed to be compatible with the S5800-48F4S Ethernet Switches. You can install it without powering off the switch or disrupting the switching function. The AC power supplies in S5800-48F4S switch give an output of 150W and supports both low line voltage (100–120 VAC) and high line voltage (200–240 VAC). They provide a low-cost, simple solution to the problem of a failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switching device and maximize the availability of the switching device.

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products